top of page

Need Installation?

Product Page: Stores_Product_Widget

PLEASE CONTACT US FOR PRICES AND AVAILABILITY

 

SRIPM225H9DHVX144

 

The long awaited higher voltage AC motor from NetGain is here. The new 9 inch HyPer9 HV AC motor is based on a new high efficiency design. The motor is a permanent magnet assisted synchronous reluctance design and holds the highest efficiency rating of IE4+ at 94% motor efficiency. The motor is IP56 sealed. The matching controller, an AC-X144 by SME Group will accept a supply side DC voltage of up to 180 Volts, and will output up to 500 Amps output, with a peak 88kW of power. The permanent magnets are a new design that are manufactured without the use of rare earth elements, but still gain a big efficiency advantage with a powerful 162 lb/ft of torque.

*SME Dash Display is sold separately

This kit includes:
HyPer 9 HV Motor
SME AC-X144 Controller
35 Pin Connector and Wire Harness
Gigavac GV200-QA Contactor
12 Volt HV Relay


Motor Face: B-Face (Warp Compatible)
Motor Diameter: 9.0 Inches
Motor Case Length: 13.75 Inches
Motor Shaft Length: 2.0 Inches
Motor Shaft to End Length: 15.75 Inches
Motor Type: Permanent Magnet Synchronous Reluctance AC
Weight: 120 lbs
Max Voltage Input: 180
Terminal Stud Size: M8 Inch
Integrated Sensors: Encoder and Temperature
Rated Torque: 162 Lb Ft
Rated Power: 120 HP
Max RPM: 8,000
RPM Sensor: Yes
Drive End Shaft: 1-1/8 Inch with 1/4 Inch Keyway
Accessory End Shaft: (available soon)
Max Efficiency: 0.94
Thermal Cooling: External Heatsink
Max Temperature: 150 Degrees Celsius
Matching Controller Included In Price:

Note: Please enquire for availablity and freight quotes.

NetGain HyPer9 HV AC Motor X144 Controller Kit 144 Volt

  • Motor Face: B-Face
    Motor Diameter: 8.980 Inches
    Motor Case Length: 13.798 Inches
    Motor Shaft Length End to End: 17.5 Inches
    Motor Type: AC Induction
    Brushes: No
    Interpoles: No
    Weight: 52 Kg (115 lbs)
    Max Voltage Input: 130
    Terminal Stud Size: 3/8 Inch
    Integrated Sensors: Encoder
    Rated Torque: 120 Lb Ft
    Rated Power: 71 HP
    Continuos RPM: 5,000
    Max RPM: 10,000
    RPM Sensor: No
    Drive End Shaft: 1 1/8 Inch With 1/4 Inch Keyway
    Acc/Commutator End Shaft: Optional 7/8 Inch With 3/16 Keyway
    Timing: N/A
    Max Efficiency: 88%
    Thermal Cooling: Internal Fan
    Max Temperature: 180 Degrees Celsius (356 Degrees Fahrenheit)
    Matching Controller Included In Price: Curtis Controller
    Warranty Period: 2 Years

bottom of page