Cylon 32 Wall Charger / EVSE

$990.00

EV Charging Station – 32 amp (7.6Kw)

The Cylon 32 is a our very own product and is the quickest (and coolest) way to charge your electric vehicle at home without investing in 3 phase power. The unit offers Level 2 charging at 7.6kw via its Type 1 / J1772 or Type 2 Mennekes charging nozzle. The Cylon32 can add up to approx 30- 40km of range for every hour of charge however, this is dependent upon the capabilities of your car.

SKU: N/A Categories: ,
Clear
Quantity

Description

The casing is made of toughened UV stabilised polycarbonate and is rated to IP65 meaning it can be installed outside, though we would recommend a casing to protect your investment.  The unit comes equipped with 5 metres of cable, a cable tidy and charging dock to keep everything tidy in your garage.

 Note: This is just about the fastest you can practically charge at home so a good investment, even if your current car cannot charge at this rate your next one will for sure! 

 

Features

  • Level 2 charging at 32 amps (or 7.6kw)
  • Faster charging – quicker than EVSEs usually supplied with EVs by Mitsubishi, BMW, Holden, Hyundai  etc
  • Up to 7.6kw charging rate or approx. 30-40km of range per hour
  • 5 meters cable length (size: 32cm x 27cm x 13cm)
  • Premium and robust product 
  • Integral RCD (breaker)
  • RCM and Electrical Safety compliant – mMost overseas products are not and if so you are not insured!
  • IEC 62196 and 61861 compliant
  • 2 years Warranty
  • Select from either Type 1 (J1772) or Type 2 (Mennekes) Connector  
  • Easy Installation
  • Auto Charging recovery (in the event of power disruption) 
  • Over Current protection 
  • Comes as standard fitted with 32amp Australian plug (larger Earth pin) or can be hard wired
  • IP65 rated so can be mounted outside though we recommend an enclosure to protect your investment

The unit is designed to be hardwired into a suitable power circuit so a dedicated line and breaker may be required for use on some domestic and commercial installations.

 

Additional information

Compatibility

The unit is compatible with all major EVs that use the Mennekes and J1772 connectors as listed below:

Audi A3 e-tron,
BMW i3, BMW 330e, BMW X5 xDrive40e,
Chevrolet Bolt
Fiat 500e
Ford Focus Electric
Holden Volt,
Hyundai Ioniq
Kia Soul EV
Nissan Leaf & eNV-200
Mitsubishi Outlander PHEV & i-miev
Mercedes Benz C350 e & B250 e
Porsche Cayenne Hybrid & Panamera Hybrid
Renault Kangoo ZE
Renault Zoe ZE
Toyota Prius Plug-in
Tesla Model S & Model X
Volvo XC90 T8
VW Golf GTE & Golf E

Connection Type

Type 1 / J1772, Type 2 / Mennekes

Options

Corporate branding
kWh meter – ideal for tax rebates

Reviews from around the web

“I was most impressed with the service, the Cylon arrived within a couple of days of ordering even though I’m in Christchurch! The quality of the information available to me via your website, it was this level of detail which led to my order with you.  I am not disappointed in any way! Previously, I was unable to do a repeat journey in the evening into town due to the slow rate of charge available from the supplied charger. I can see this being a past problem. Again, many thanks for your excellent service.”

Harvie (Nissan LEAF ), Seddon NZ

“The Cylon32 looks very schmick and charges like a champ! The installation went very well It  looks fantastic! They had to use external conduit as I didn’t have enough room in my ceiling to run cables through, but I actually like the industrial look of it.”

Miika (Holden Volt), Canberra

Reviews

There are no reviews yet.

Be the first to review “Cylon 32 Wall Charger / EVSE”

You may also like…