RAY Switchable EVSE 6 – 15 Amp / 3.6kw

5.00 out of 5 based on 1 customer rating
1 customer review

$1,099.00 $989.00

Charge-Amps – switchable EVSE for Type 1 & 2

The portable Charge-Amps RAY EVSE / charger provides efficient, reliable and hassle-free portable charging. RAY is a premium and robust product that is innovatively designed with the weight and shape of the control box, the flexibility of the cable and the grip of the connector in mind.

Shipping is Free On This Product To Anywhere in Australia



It comes with either Type 1 (J1772) Connector OR Type 2 (Mennekes) Connector and Level 2 Charging at up to 16 amps (or 3.3kw) Charging. This is much quicker than EVSEs usually supplied with most dealers. 

From the led display you can choose ampere settings of everything between 6-16A and during the dark hours of the night, the built-in flashlight will find your way to the socket.

It is also RCM and Electrical Safety compliant – most overseas products are not and if so you are not insured!



  • Type 1 / J1772 OR Type 2 / Mennekes connector and cable 
  • Up to 3.6kw charging rate or approx. 15-20km of range per hour
  • Auto Charging recovery (in the event of power disruption) 
  • Selectable Charge Rate between 6 and 16 amps
  • Standard 15amp Australian plug or CEE 16-6
  • Detailed charging information via LCD screen
  • Over Current protection 
  • IEC 62196 and 61861 compliant
  • IP54 rated 
  • 2 Years Warranty
  • 7.5 metres cable length


Additional information


Compatible with all Type 1 / J1772 and Type 2 / Mennekes equipped vehicles which include the below.

Audi A3 e-tron,
BMW i3, BMW 330e, BMW X5 xDrive40e,
Chevrolet Bolt
Fiat 500e
Ford Focus Electric
Holden Volt,
Hyundai Ioniq
Kia Soul EV
Nissan Leaf,
Nissan NV-200
Mitsubishi Outlander PHEV,
Mitsubishi i-miev
Mercedes Benz C350 e,
Mercedes Benz B250 e,
Porsche Cayenne Hybrid
Porsche Panamera Hybrid,
Renault Kangoo ZE
Renault Fluence ZE
Renault Zoe
Toyota Prius Plug-in,
Tesla Model S,
Tesla Model X,
Volvo XC90 T8,
VW Golf GTE,
VW Golf E


Mode – 2
Voltage – 220-240V
Current – Max 20A
Vehicle interface – SAE J1772 (IEC Type 1)
Cable length – 7.5m
Ground fault protection – RCD type A, <30mA
Encapsulation – IP66
Operating temperature – -25 °C to + +45 °C
Standards – IEC 61851-1 ED.3 ; IEC 62196-2
Productive earth conductor – Non-switched
Self-tests – self tests of the RDC are performed at the insertion into the car, the relays are continously monitored for welding.

Connection Type

Type 1 / J1772, Type 2 / Mennekes

Plug Type

Australian 15 Amp, CEE16-6, BS1363, Schuko

1 review for RAY Switchable EVSE 6 – 15 Amp / 3.6kw

  1. EVo Admin

    Received the Charge Amps Ray recently, right on schedule. The Ray’s ease of use and conveniently adjustable charge setting suits my stand alone solar charging set-up just fine. As my BMW i3s and I are at home during the day, much of the time, I wished to be able to easily match the charging power to the amount of PV above. Previously that meant just too much trouble, hopping in the car and starting it to adjust low, medium and high settings with the cars I drive controller. So easy now with the 6 to 16 amp amp adjustment right there on the Ray connector, ideally matched to the limited output of my off-grid system. Thanks again for the service and advice.
    Gary in Brisbane.

Add a review

You may also like…